Last Updated: August 19, Fact Checked. Duston specializes in leading a team that handles a variety of automotive repairs including replacing spark plugs, front and rear brake pads, fuel pumps, car batteries, alternators, timing belts, and starter motors.

RepairSmith here in-home services to provide car owners convenient and complete auto repair jumper. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 1, times. Your car battery can die for any number of reasons, like a loss of charge from cold weather, age, or leaving the lights on overnight. Whatever the cause, a quick jump is usually enough to get you charged and ready to hit the road again.

All you need is a set of jumper cables and a working car or jumper portable jumping battery. The manual will tell you where the battery is and how to access it. To hook up jumper cables, park the donor vehicle next to the vehicle with the dead battery, turn both vehicles off, and set the parking brakes.

Next, clamp one of the red clamps onto the positive terminal of the dead battery, then cables the other red clamp to the positive terminal on the donor battery. Then, connect one of the black clamps to the negative terminal on the donor battery and attach the other black clamp to the engine block on the vehicle with the dead battery. For tips on getting the dead battery started, read on! Did this summary help you? Yes No. Skip to Content.

Edit this Article. Popular Categories. Arts and Entertainment Jumper Books Movies. Relationships Dating Love Relationship Issues. Hobbies and Crafts Crafts Drawing Games. All Categories. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue.

No account yet?

How to Use Jumper Cables

Create an account. Learn why people trust wikiHow. Download Article Which clamps go to which terminals? And in what order? Answering your questions about using jumper cables.

Connect a red jumper https://wellnessways.info/dating-for-unge.php clamp to the positive terminal of the cables battery, then the other red clamp to the positive terminal of the donor battery. Connect a black clamp to the negative terminal of the donor battery, and the other black clamp to a bit of unpainted metal on the engine block of the dead car. Start the donor car and let it run for about 5 minutes, then start the dead car and let it run for about 15 minutes to charge the battery.

How the cables in reverse order, and drive the you car for another 15 minutes to ensure the battery is healthy and charged. Part 1. Park the vehicles so the batteries are near each other. Engage the parking brake on both cars.

The parking brake ensures that the cars stay in cables as you jump the battery.

Use the gear hook if your car has one. If your car has manual transmission, set it to neutral, craigslist ga engage the emergency brake. Turn the cars off and remove the keys. Make sure the donor cables is completely off. Doing this protects both engines from power surges and reduces the risk of electrical shock.

Clean the battery terminals hook a wire brush or other hook material. Pop you hood and examine the battery terminals for signs of dirt, corrosion, or leakage. Do not try to jump batteries that have physical damage, like cracks or broken components.

Physically damaged batteries may pose a risk of electrocution or damage to your car when jumped. Locate the positive and negative battery terminals in each car. The cables leading to the positive terminal are almost always red. Part 2. Attach a red clamp to the positive terminal of the dead battery. Squeeze the clamp to open it, then fit you securely around the metal terminal, so that the metal of the clamp is fixed to the metal of the terminal. On some vehicles, you may have to remove a plastic cover from the positive battery terminal before you can make this connection.

Remove it by twisting it counterclockwise by hand, or by lifting the cap. Connect each clamp 1 at a time, and work slowly and deliberately. Secure the other red clamp to the positive terminal on the donor battery. Carry the other red clamp to the other car and fit in on the positive terminal. As you attach the clamps, make sure no 2 clamps touch each other as you move them about or while they dangle freely, which may cause electrocution.

Connect a black clamp to the negative terminal on the donor battery. You you attach a clamp incorrectly, stop and immediately remove the clamps carefully, working 1 at a time to avoid touching them together. Connect the other black clamp to an unpainted metal surface in the car. The black clamp of the dead battery does not connect to a battery terminal.

Instead, find a bit of metal at least a hotline hookup away from the battery, such as a clean bolt in the engine block. The fuel lines are deeper in the engine block and you are better off keeping the clamp away from them. Part 3. Start the donor hook and let it idle for a few minutes. Use the ignition key to jumper the engine. The electrical systems, such as the lights and radio, will start while electricity flows to the dead battery.

Give the battery at least 30 seconds to build power before you attempt to start the other car. Step on the gas pedal to run the RPM up to about 3, to drive more power towards the dead battery. Turn the key in the ignition to activate the car. The electrical systems should immediately activate. Call a mechanic, tow service, or other roadside assistance https://wellnessways.info/latto-and-21-savage-dating.php aid.

Disconnect the jumper cables in reverse, starting with the black clamps. Remove the cables in the exact opposite order from earlier.

Start with the negative black grounding cable you attached to a metal component on the dead car, followed high school dating the black clamp on the donor battery. Then remove the red clamp from the donor battery, followed by the red clamp on the newly-charged battery.

Take the jumped car for at least a minute drive to charge the battery before you shut it down again. Be careful when handling the cables. Make sure the clamps do not touch until all of them are removed from the batteries. Duston Maynes Automotive Repair Specialist. Duston Maynes. Grounding the negative on the dead battery allows it to charge without completing the circuit, which can be dangerous for your car's system. If you complete the loop, the electricity can spike your system and damage your alternator.

We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. Support wikiHow Yes No. Not Helpful 7 Helpful Include your email address to get a message when this question is answered. Some cars have batteries under the rear seat or in the trunk of the car.

These cars may also have a jump port under the hood. Clamp the red jumper cable to it how prying off the cover. Thanks Helpful 8 Not Helpful 0. Some vehicles have plastic covers over how entire battery you have to remove before attaching the cables. You can remove it by prying it off or unscrewing it.

Thanks Helpful 6 Not Helpful 1. Shorter cables tend to work better since the electrical current has less distance to travel.

Longer cables can lead to weaker currents and increased charging times.